4300 Block Heater

   / 4300 Block Heater #1  

brewerbob

Bronze Member
Joined
Feb 11, 2001
Messages
94
Location
Ferry County, Washington
Tractor
Deere 4300 HST
My sweet wife bought me a block heater for Christmas, and I'm trying to figure out exactly where it screws in, and the easiest way to install it. Anyone have any suggestions? The tractor has been hard to start in the cold, and hope this will help it out.
Bob
 
   / 4300 Block Heater #2  
Could I ask at what temperatures it has been hard to start?
Also, is the heater a JD item? If not, what brand? Pic?
 
   / 4300 Block Heater
  • Thread Starter
#3  
Hard to start when the temp is in the lower 20s. I suspect that there is another problem, probably with a fuel line air leak allowing the fuel to siphon back to the tank over time, but thought I'd start with the block heater. The heater is a Deere part (AR87167), my wife paid the dealer about $50 for it. I understand that it screws into the block somewhere under the exhaust manifold, but would like some expert advice before tackling it.
Bob
 
   / 4300 Block Heater #4  
00003e5bvgrgnzzd.jpg


<A target="_blank" HREF=http://jdpc.deere.com/servlet/com.deere.u90490.partscatalog.view.servlets.PrintPageServlet?printParams=Illustration,+Keylines>Block Heater for JD 4200/4300/4400</A>

18-35197-JD5205JFMsignaturelogo.JPG
 

Tractor & Equipment Auctions

2009 Trail King TK110HDG-523 RGN 66 Ton Tri-Axle Lowboy Trailer (A49461)
2009 Trail King...
2021 Case Trident 5550 Spreader (A51039)
2021 Case Trident...
2019 Ford F-150 4X4 (A50397)
2019 Ford F-150...
2012 GENIE S-60X MANLIFT (A50854)
2012 GENIE S-60X...
2003 JOHN DEERE 350D OFF ROAD DUMP (A51242)
2003 JOHN DEERE...
BREWSTER DRAWWORKS WITH TWIN CATERPILLAR ENGINES (A50854)
BREWSTER DRAWWORKS...
 
Top