4300 hydro pedals super sensitive and do not return to neutral

[gonediesel]

My tractor had sat for a few months and when I drove it today the hydro pedals would not return to neutral so the tractor would either creep forward or reverse. Normally in the past when I pushed down on the pedals I would get some resistance on the pedals now for some reason they are very touchy. Any help or suggestions is appreciated. Thanks, GD

 

[beenthere]

Some lubrication will likely help..

 

[gonediesel]

The area was actually clean and lubricated. I did do a WD40 bath to the area as a just in case and greased everything I could find but not any better.

 

[Egon]

If the pedals move very easily perhaps the tensioning apparatus has lost a pin allowing one of the parts to unthread.