4310 50hr service

   / 4310 50hr service #1  

JimmyD

Bronze Member
Joined
May 25, 2003
Messages
67
Location
VA
Tractor
JD4310/Sync Shift/ 430 loader /toothbar
Just finished the 50 hr service on my tractor. It wasn't as bad as I thought. As expected the suction side filter was on there really tight. Hydraulics took about a half a gallon more than the book says is the approximate fill. I also replaced the instrument panel glass that was fogging up and that was a stinker to finish. Getting the U shaped tilt gizmo on the steering column back on correctly took forever. I'm wondering if the technical manual has a procedure for this. I dread having to pull the cluster again to replace a lamp. etc,,,
 
   / 4310 50hr service #2  
</font><font color="blue" class="small">( I also replaced the instrument panel glass that was fogging up and that was a stinker to finish. Getting the U shaped tilt gizmo on the steering column back on correctly took forever. I'm wondering if the technical manual has a procedure for this. I dread having to pull the cluster again to replace a lamp. etc,,, )</font>

Actually you went from the wrong side You are supposed to remove the engine!! /forums/images/graemlins/tongue.gif
 

Tractor & Equipment Auctions

2018 CATERPILLAR 308E2 CR EXCAVATOR (A50458)
2018 CATERPILLAR...
2007 BIG TEX END DUMP TRAILER (A50854)
2007 BIG TEX END...
Brent 420 Grain Cart (A50514)
Brent 420 Grain...
2012 Ford F150 Crew Cab Pickup Truck (A50323)
2012 Ford F150...
2018 John Deere 524K-II Articulated Wheel Loader (A50322)
2018 John Deere...
197390 (A50459)
197390 (A50459)
 
Top