4310 wiring

   / 4310 wiring #1  

Twanger

Bronze Member
Joined
Mar 22, 2002
Messages
91
Location
KCMO
Tractor
4310 4wd ehydro 420 loader asof 4/2/02
Has anyone noticed in the wiring harness around the rockshaft there are some wires that are not connected. One is a purple plug to male prongs and another is a crimp on connector. Is this for the implement lights the talk of in the manual?
 
   / 4310 wiring #2  
<font color=blue>...One is a purple plug to male prongs ...</font color=blue>

The recent JD units I have seen use "purple" as the auxiliary lamp circuit...

18-35196-JDMFWDSigJFM.JPG
 
   / 4310 wiring
  • Thread Starter
#3  
Should I be concerned there is no cap or any protective device on these prongs? What aux lamps could I run with this connection?. I've heard it is for some kind of implement light.
 
   / 4310 wiring #4  
Most of those circuits are on a 20 amp feed... that is "switchable" with your main dash switch...

Yes, rear work lamps, aux. front lamps, etc. - anything you want to supply 12 vdc. to while the switch is in that position can plug into this pigtail...
 
   / 4310 wiring #5  
Once again, John.....someday I'll figure it out. Keep the info coming; I'm not complaining.

Bill
 

Tractor & Equipment Auctions

2017 Caterpillar 326FL Hydraulic Excavator (A50322)
2017 Caterpillar...
2012 MACK PINNACLE (A50854)
2012 MACK PINNACLE...
2022 CATERPILLAR CS54B SMOOTH DRUM ROLLER (A51242)
2022 CATERPILLAR...
30ft Pole S/A Towable Trailer (A49346)
30ft Pole S/A...
2022 Bobcat E88 Excavator (RIDE AND DRIVE) (A50774)
2022 Bobcat E88...
2018 PETERBILT 579 SLEEPER (A51222)
2018 PETERBILT 579...
 
Top