4310 wiring

   / 4310 wiring #1  

Twanger

Bronze Member
Joined
Mar 22, 2002
Messages
91
Location
KCMO
Tractor
4310 4wd ehydro 420 loader asof 4/2/02
Has anyone noticed in the wiring harness around the rockshaft there are some wires that are not connected. One is a purple plug to male prongs and another is a crimp on connector. Is this for the implement lights the talk of in the manual?
 
   / 4310 wiring #2  
<font color=blue>...One is a purple plug to male prongs ...</font color=blue>

The recent JD units I have seen use "purple" as the auxiliary lamp circuit...

18-35196-JDMFWDSigJFM.JPG
 
   / 4310 wiring
  • Thread Starter
#3  
Should I be concerned there is no cap or any protective device on these prongs? What aux lamps could I run with this connection?. I've heard it is for some kind of implement light.
 
   / 4310 wiring #4  
Most of those circuits are on a 20 amp feed... that is "switchable" with your main dash switch...

Yes, rear work lamps, aux. front lamps, etc. - anything you want to supply 12 vdc. to while the switch is in that position can plug into this pigtail...
 
   / 4310 wiring #5  
Once again, John.....someday I'll figure it out. Keep the info coming; I'm not complaining.

Bill
 

Tractor & Equipment Auctions

2011 INTERNATIONAL PROSTAR +122 6X4 DAYCAB ROAD TR (A51243)
2011 INTERNATIONAL...
2018 Chevrolet Tahoe SUV (A50324)
2018 Chevrolet...
CAT 312C (A50854)
CAT 312C (A50854)
2020 KUBOTA RTV X1100C UTV (A51406)
2020 KUBOTA RTV...
PETTIBONE B66 EXTENDO (A51222)
PETTIBONE B66...
2014 UTILITY 53X102 DRY VAN TRAILER (A51222)
2014 UTILITY...
 
Top