Cidertom
Gold Member
- Joined
- Dec 14, 2005
- Messages
- 478
- Location
- Benton Co Oregon
- Tractor
- JD 4520, 2305 Aktive snow-trac ST4
Greetings: When I dismount the bh I have the bucket flat as instructed, which produces the correct angle for remouning. Problem is that the hydraluics bleed down and the bucket curls allowing the unit to lean too far back. If I don't use the BH for a few weeks I have to back in and hook up hyd to reposition the bucket to be able to remount.
Any ideas? I think all the hyd leak down too much but this ones is a pain.
Any ideas? I think all the hyd leak down too much but this ones is a pain.