peatley
New member
I'm new and I need directions for wiring ignition switch on Ford 4610 su diesel.
I have some thing wired wrong and runs battery dead.
I have some thing wired wrong and runs battery dead.
4610 su ford wiring
- Thread starter peatley
- Start date
- Views: 5648
Welcome to TBN. 
Depmandog
Veteran Member
- Joined
- Nov 26, 2010
- Messages
- 2,038
- Location
- Buckner MO, LaPlata MO
- Tractor
- 2005 Kubota L5030 GST; Farmall 706, 756, 806 & 1086
Try reposting your question in the New Holland / Ford forum (owning & operating). Several resident Ford experts who are frequent posters monitor that forum, and I am sure they will come along and offer suggestions.
Welcome aboard.
Welcome aboard.
kensnelling
Veteran Member
Welcome to TBN from Oklahoma.
Ken
Ken
moored4
Veteran Member
- Joined
- Jan 31, 2011
- Messages
- 2,311
- Tractor
- Kubota l245dt, l3540, 8N
:welcome: to TBN! :thumbsup:
Happy :tractor: ing!
Happy :tractor: ing!
Briana03
Elite Member
Welcome to TBN
I moved your thread to the Ford/New Holland Owning & Operating Forum.
I moved your thread to the Ford/New Holland Owning & Operating Forum.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
do you have a service manual? schematics are in there.
otherwise.. you will have many positions that can become hot from the main feed.. otherwise when off.. none of the other connecions should be hot. kinda basic description.. but 1 in.. many outs.
otherwise.. you will have many positions that can become hot from the main feed.. otherwise when off.. none of the other connecions should be hot. kinda basic description.. but 1 in.. many outs.
awellc
New member
A few questions. Are you installing a new ignition switch because of the battery drain? If so you may want to make sure you check the wires from the starter, alternator and light switch to make sure you do not have any places the insulation has rubbed through or connectors touching and grounding out. They don't cover that one in the manuals.
