Looking at your attachments, I offer the following suggestion - loosen and rotate the 90 degree fitting on the lower rear remote hose on the right side of the top link 90 degrees (or what ever it takes) to the right , this will increase your clearance to the cylinder, the quick disconnect should rotate to accomadate this adjustment, but I'm not sure it will provide proper hose orientation for your backhoe. I had to do something simular on my JD 790 with the remotes for clearance for my hydraulic top link. Also, if you had a welded (verses a tie rod) top link cylinder you may gain some cleanance. For the other outlets, can you "carefully" bend the tubeing to move them to the left?