OP
TheEquineFencer
Member
- Joined
- Jun 10, 2010
- Messages
- 34
I have flow and pressure. What I don't have is the flow going to the right place when the hydraulics are switched from the remotes, back to the tractor for operating the 3pt lift.
I need to know the how and where the hydraulics are supposed to work when the lift is operated. Lift lever will be in the DOWN position and when the hydraulics are moved back to the tractor, the 3pt hitch will go UP if the lift has leaked down any, then you hear the pump relief start bypassing.
I need to know the how and where the hydraulics are supposed to work when the lift is operated. Lift lever will be in the DOWN position and when the hydraulics are moved back to the tractor, the 3pt hitch will go UP if the lift has leaked down any, then you hear the pump relief start bypassing.
