RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,190
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
Probably a faulty coil, ignition switch, or poor harness connection. When it cuts out, don't touch the ignition switch but immediately use a meter or test lamp to check for power at the coil connection coming from the key switch. If power is present, replace coil. if not, tract the circuit back to the fault.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
you know.. you've already posted about this here:
http://www.tractorbynet.com/forums/ford-vintage-tractors/196282-some-progress-850-a.html
it's a new coil.
so far you've already been told what to check. since it's a NEW coil on 6v .. it's very likely NOT the coil. key switch contacts have also been mention.
have you checked any of these.. or?
soundguy
http://www.tractorbynet.com/forums/ford-vintage-tractors/196282-some-progress-850-a.html
it's a new coil.
so far you've already been told what to check. since it's a NEW coil on 6v .. it's very likely NOT the coil. key switch contacts have also been mention.
have you checked any of these.. or?
soundguy
