Billhd
New member
Back wo"t move when you put it in gear
580 case backhoe won"t move
- Thread starter Billhd
- Start date
- Views: 27590
The kid
Elite Member
- Joined
- Apr 25, 2012
- Messages
- 4,113
- Location
- Middle Tennessee
- Tractor
- 1965 135 gasser, 1967 135 diesel
Welcome to TBN.
Message posted with TractorByNet v1.6.2 for iPad
Message posted with TractorByNet v1.6.2 for iPad
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 19,507
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
:welcome: to TBN
jmc
Elite Member
- Joined
- Jul 21, 2003
- Messages
- 3,159
- Location
- SW Indiana
- Tractor
- Ford 1920 4x4 (traded in on Kubota). Case 480F TLB w/4 in 1 bucket, 4x4. Gehl CTL60 tracked loader, Kubota L4330 GST
Well, I've made the following mistake on my Case 480F- you have to put it in gear at two different places. First, on the floor shift in picking a gear. Second, on the column between forward or reverse. Brain fart on my part, but another TBN member reminded me. (I only use it about once a year). Hope this is your problem too.
Gale Hawkins
Super Star Member
- Joined
- Sep 20, 2009
- Messages
- 12,426
- Location
- Murray, KY
- Tractor
- 1948 Allis Chambers Model B 1976 265 MF / 1983 JD 310B Backhoe / 1966 Ford 3000 Diesel / 1980 3600 Diesel
Welcome. Try all the other functions of the FEL and hoe and if they work your pump should be working. Lift the tires and see if you can get them to turn when just in the air. When you shift from forward to reverse and back does it make any sounds when your wheels are off the ground?
Briana03
Elite Member
Welcome to TractorByNet! 
I moved your thread to the Construction Equipment forum.
I moved your thread to the Construction Equipment forum.
Bob Rooks
Elite Member
D7E
Veteran Member
- Joined
- May 10, 2006
- Messages
- 2,267
- Location
- manitoba
- Tractor
- Versatile 895 Versatile 876 Ford TW20 Ford TW5 MF 3505 FWA MF 390 FWA Ford 7600 Fiat 766 FWA JD 2030 MF 165 MF 35 Fordson major x 3 CAT 416 b Backhoe Case 580 b backhoe MF
I had a 580G that did something once long time ago . I think the shuttle linkage fell apart but it felt like it was engaging ?
I just bought a 68 580 CK that was sitting when the guy I bought it from bought it and it has issues with the fuel pump timing and I guess that's why he sold it. Anyway, when I bought it the guy had changed all of the filters only to find out that there was water in the hydraulic fluid from a bad shifter boot. I ran it to test everything and to drive it on and off the trailer, well after it was run for a while it started having problems going into gear and I suspect it's because of water in the fluid and I had to rev it up to get it to move. Check your fluids and go from there. I hope this helps. Make sure you use the right fluid or at least some that's compatible with Case machines.
