Snow 59" Front Mount Blower on 755

[Kevin M]

Was wondering if you guys would recommend this is anyone else running one on a 755 ?

 

[bigtiller]

I think it would be a fun project and look really cool in the Labor Day parade. But for blowing snow with it, I don't think your tactor is heavy enough to handle it and the 15 pto hp isn't nearly enough power. If you have the supplies to make your own mounts, carrier bearings and drive shaft, do it and show us some pictures.

 

[beenthere]

Kevin
Check this chart out.. looks to be a fit.
https://www.muttonpower.com/t-Used-John-Deere-59-Snow-Blower-Chart.aspx

 

[Dutch445]

They also made the same style in a 47" size. My caution would be the 755 is a bit aged by now,
and probably not making the power it did when it was new,, that 59 would be a lot of blower
in deep snows for that tractor, IMHO.
do you have a chance to buy a used one?

 

[Kevin M]

Yeah I have a chance to buy a used setup that apparently came off a 755 ,

 

[Kevin M]

I think it would be a fun project and look really cool in the Labor Day parade. But for blowing snow with it, I don't think your tactor is heavy enough to handle it and the 15 pto hp isn't nearly enough power. If you have the supplies to make your own mounts, carrier bearings and drive shaft, do it and show us some pictures.

, The 59" did come on a 855 which is like 2hp different otherwise the same tractor with a slightly longer frame

 

[bigtiller]

Wow, proved wrong again! I had no idea a tractor as small as a 655 with 10.5 pto hp could be matched up with a 59" blower.

 

[Kevin M]

Wow, proved wrong again! I had no idea a tractor as small as a 655 with 10.5 pto hp could be matched up with a 59" blower.

I think that's was just for the hitch attachment part

 

[Kevin M]

I'd probably be better off with the 48" if I could find one locally