KilroyJC
Elite Member
- Joined
- Mar 30, 2022
- Messages
- 2,873
- Location
- Appalachia
- Tractor
- 1962 Case 430, 1995 Craftsman Yard Tractor/mower, 1949 South Bend 9A Lathe, WoodMizer Lx55 sawmill, Kubota KX033-4 Mini-Excavator
1962 Case 430, using a Ferguson 2-disc plow and an anonymous 20-disc harrow. The arm ends are probably about an inch-and-a-quarter or so farther apart than they should be as the outside of the Claw hooks are right up against the lynch pins.
would it be a bad thing if I were to slip a large fender washer to provide extra bearing surface to help align and retain the attachments?
Another question: is there supposed to be some sort of spring in the latching system,? It seems to be working better for me if I hook in a small bungee to provide some tension to the mechanism.
there certainly is a lot to learn!
would it be a bad thing if I were to slip a large fender washer to provide extra bearing surface to help align and retain the attachments?
Another question: is there supposed to be some sort of spring in the latching system,? It seems to be working better for me if I hook in a small bungee to provide some tension to the mechanism.
there certainly is a lot to learn!