6o Gallon Fimco on 2305

   / 6o Gallon Fimco on 2305 #1  

fitzisprint955

Bronze Member
Joined
Dec 11, 2005
Messages
63
Location
Barneveld. Wisconsin
Tractor
2305/345GX
Was able to get the Fimco put together and also attached a spraygun gun today. Waiting for the bushing kit to cone in at the dealership so I can derect mount with the I-match. The spraygun works like a champ, will spray out about 20' and has a 25' hose. Cannot wait for the rain to quit. Here are some pics.
http://i83.photobucket.com/albums/j310/redthruxton/DSC_4348.jpg
http://i83.photobucket.com/albums/j310/redthruxton/DSC_4354.jpg
http://i83.photobucket.com/albums/j310/redthruxton/DSC_4351.jpg
Got the spraygun and fittings at Farm&Fleet also the sprayer and the pump, sure beets the ATV sprayer we have on the farm. Fitz
 
   / 6o Gallon Fimco on 2305
  • Thread Starter
#3  
At Farm&Fleet the sprayer and base with boom $399 on sale, the PTO pump was $110, and the 25' hose was $12, the spraygun $49, misc plumbing parts, $30ish, not too hard to set up, the cut offs I got have nice big handles. I used it today and ran 2 tanks, the boom and the spraygun are super, and compared to the ATV setup not even close. Best $600 spent yet.....Fitz
 
   / 6o Gallon Fimco on 2305 #4  
fitz,

That is good pricing; we're a few hundred more around these parts. Maybe Farm & Fleet wants to set up a test store around me! :)
 
   / 6o Gallon Fimco on 2305 #5  
Have you measured it to see if it's iMatch comaptible? I'm looking at getting the 25 gal model with the same boom and a 12v pump and I'm going to mount it to a 3PH carry-all that is iMatch compatible. If that is iMatch compatible I might have to go that way. That base unit $550 here! You got a great deal!
 
   / 6o Gallon Fimco on 2305
  • Thread Starter
#6  
   / 6o Gallon Fimco on 2305 #7  
Does your front end get a little light with the tank full or does you loader off set it enough?

murph
 
   / 6o Gallon Fimco on 2305 #8  
Looks pretty good, I was thinking of getting a 25 - 30 gallon fimco ATV and mount it on my rcvr hitch tray on the 4310 - smaller version due to size of property
 
   / 6o Gallon Fimco on 2305 #10  
This may be a really stupid question, but how do you run the electrical to the pump? I have an older FIMCO ATV sprayer that the trailer was destroyed on that I've been thinking about just setting on my carry-all and spraying with off the back of my 3120. The one thing that's holding me back is an easy and robust way to run 12v DC to the pump. Is there some simple connector I can buy to put out 12V from from the 3120's electrical system?

Thanks in advance for any advice.
 

Tractor & Equipment Auctions

PEMBERTON LR129-1123 RAKE ATTACHMENT (A53426)
PEMBERTON...
2010 POLARIS RANGER 4X4 4 SEATER UTV (A52576)
2010 POLARIS...
2016 E-Z Beever M12R Towable Brush Chipper (A50322)
2016 E-Z Beever...
2016 HAMM HD+ 120I SMOOTH DOUBLE DRUM ROLLER (A51246)
2016 HAMM HD+ 120I...
4"x8' Treated Post, 36 Piece Bundle (A52384)
4"x8' Treated...
2014 Nissan Pathfinder SUV (A51694)
2014 Nissan...
 
Top