I have a 6 foot mmm that came with my tractor I bought, its a 1993 b2150 and I really need a smaller deck or maybe a 3 point finishing mower would be ok too. How hard is it to sell these decks is there a good market for them, will the interchange with other tractors or am I gonna be stuck with this thing and have to buy another deck straight out? Thanks in advance.
72inch MMM
- Thread starter bx1860
- Start date
- Views: 1547
tractorworks
Silver Member
- Joined
- Dec 30, 2002
- Messages
- 190
- Location
- South Mississippi
- Tractor
- B 2910 HSD, BX2200, Grasshopper 721DT6 and 725DT6
"will the interchange with other tractors"?
That is the big question and would pay for you to find out. If you leave it to the buyer you cut down your market. I would say there is a market considering new it is in the 3k range.
It is gonna come down to condition (does it look like a 15 year old mower?) and letting people know about it. ebay or tbn might be a good spot to advertise
That is the big question and would pay for you to find out. If you leave it to the buyer you cut down your market. I would say there is a market considering new it is in the 3k range.
It is gonna come down to condition (does it look like a 15 year old mower?) and letting people know about it. ebay or tbn might be a good spot to advertise
The deck is in good shape, it needs to be cleaned and blades sharpened, but havent had the time or weather for that just yet but I will. I would really like to trade the deck more then sell it but like you said I need to know what all it would work on, it seems to me there isn't very many of these b2150's around.
Ductape
Elite Member
Going by Kubota's application chart, looks like your mower is an RC72-B. As far as I can see, there is no other tractor on that list the RC72-B fits. From what I've seen on CraigsList and such, i'd expect it to bring $500 or so. That deck, if it were still available from Kubota, would cost over 3 grand.