JJZ 109
Veteran Member
- Joined
- Feb 7, 2009
- Messages
- 2,175
- Location
- Lake Ontario/St. Lawrence River
- Tractor
- Kubota BX2380/LA344 loader/60" MMM, Bobcat S185 skid steer, JD X394 4 wheel steer mower
Began a brake pad job on this machine today. Pulled rear caliper, very easy. I found that the pads have pins that look like they are pushed or driven through one side of the caliper, on through holes in the brake pads and then to the other side of caliper.
My question is how to remove the brake pads? No way that I can see to drive or pry the pins out of the caliper to free the pads.
The front brakes weren't much of a job at all to replace. This rear one has me scratching my head. I said to heck with it and put it back together for the time being.
My question is how to remove the brake pads? No way that I can see to drive or pry the pins out of the caliper to free the pads.
The front brakes weren't much of a job at all to replace. This rear one has me scratching my head. I said to heck with it and put it back together for the time being.
