8n hyd lift
- Thread starter drbauer
- Start date
- Views: 946
mikeinwi
Member
Dave,
There is another lever under the seat of the 8N that switches the 3 point hitch from draft control to position control. Is that lever in it's original position? Here is an article written by Zane Sherman, one of many 8N experts willing to share their knowledge in forums or articles: Yesterday's Tractors - Troubleshooting the Ford 8N Hydraulic Lift Maybe this will help.
Mike
There is another lever under the seat of the 8N that switches the 3 point hitch from draft control to position control. Is that lever in it's original position? Here is an article written by Zane Sherman, one of many 8N experts willing to share their knowledge in forums or articles: Yesterday's Tractors - Troubleshooting the Ford 8N Hydraulic Lift Maybe this will help.
Mike
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
position control is lil lever up.
check that.
if up.. try pressing on it a lil and see if it makes your lift work better. if so.. time for linkage adjustment..
post back what you find.
check that.
if up.. try pressing on it a lil and see if it makes your lift work better. if so.. time for linkage adjustment..
post back what you find.
