8N Leveling Box
- Thread starter 8N Ren
- Start date
- Views: 9178
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
guess i should not mention the sunscreen, and tshirt then?
OP
8N Ren
Gold Member
Bah! No you shouldn't! Lol
I just woke up and it's -42°C right now.
Ugh this winter feels like it will never end.
It's been so cold here that early last week my water line from the well to the house froze. That was a nice 8 hour thaw job.
First job of spring is to hire my neighbor and his backhoe to dig down so we can insulate, backfill, and add about 2 more feet to build it up.
I just woke up and it's -42°C right now.
Ugh this winter feels like it will never end.
It's been so cold here that early last week my water line from the well to the house froze. That was a nice 8 hour thaw job.
First job of spring is to hire my neighbor and his backhoe to dig down so we can insulate, backfill, and add about 2 more feet to build it up.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
and my wife is griping because the AC in her yukon just pooped out!
OP
8N Ren
Gold Member
Lol I wish.
I checked it out with a straight edge this afternoon, nothings too badly bent. I'll have to try it out when things warm up a bit.
Thanks again for the tips.
I checked it out with a straight edge this afternoon, nothings too badly bent. I'll have to try it out when things warm up a bit.
Thanks again for the tips.
OP
8N Ren
Gold Member
Update........
It seems to have worked by using the new leveling box with the old crank handle and "top hat" gear thing, can't remember the name. I cleared up some snow tonight for about an hour and it wasn't rubbing on the axle trumpet.
It seems to have worked by using the new leveling box with the old crank handle and "top hat" gear thing, can't remember the name. I cleared up some snow tonight for about an hour and it wasn't rubbing on the axle trumpet.
Dollar Bill
Silver Member
- Joined
- Dec 21, 2010
- Messages
- 107
- Location
- Keystone Heights, FL
- Tractor
- 48/50 8N, 63 4000 Row Crop NF
Great! Glad you figured it out and thanks for posting back with your resolution.
OP
8N Ren
Gold Member
Thanks for mentioning the"top hat", you made me think about messing with it. I try to always follow up, drives me nut when people don't.
Similar threads
