rice_harvester
New member
- Joined
- May 7, 2022
- Messages
- 13
- Tractor
- new holland skid steer,
I'm looking / hoping for clarification from those with more 8-lug 16in "wheel" experience.... a friend told me he is planning on using 9/16 hole wheels on a (~7k axles) equipment trailer with the smaller 1/2" lug studs. This seems a little crazy to me relying on the nuts to perhaps center things- but it is a small difference , maybe I'm wrong.
I'm the one offering to give/sell him the 9/16 wheels, but only if that's the right way to do it..
I know that the studs can be easily changed out (but buying all new studs= the cost certainly seems to add up, as does the time invested - to the point where he is better off tracking down the 1/2 hole wheels in my perspective)
Same concept in some "vintage" pickups, (maybe?) pre 93 dodge and definitely some pre 79 ford had the 8x6.5 & 1/2" lugs too, I believe.
Anyone have a definitive answer on whether this is acceptable, or further input on this? thanks in advance!
I'm the one offering to give/sell him the 9/16 wheels, but only if that's the right way to do it..
I know that the studs can be easily changed out (but buying all new studs= the cost certainly seems to add up, as does the time invested - to the point where he is better off tracking down the 1/2 hole wheels in my perspective)
Same concept in some "vintage" pickups, (maybe?) pre 93 dodge and definitely some pre 79 ford had the 8x6.5 & 1/2" lugs too, I believe.
Anyone have a definitive answer on whether this is acceptable, or further input on this? thanks in advance!
