jwstewar
Elite Member
I purchased all of my parts from one of my two local dealers that I purchase from. They are usually the same price or just a bit cheaper than Messicks and I don't have to pay shipping.
914A Mower Deck Help
- Thread starter SacandagaBrad
- Start date
- Views: 14357
jwstewar
Elite Member
One thing to note, I didn't replace any actual spindles, just the bearings and cups to rebuild them.
FloGrown81
New member
Got a part number for those?
Messicks only has a complete spindle, i could do with just the bearings and cups.
Messicks only has a complete spindle, i could do with just the bearings and cups.
jwstewar
Elite Member
The bearing cone is 13271 25.4 mm ID x14.73 mm W. Then the Bearing Cup itself is 132709 it is 50.29mm OD x 10.67mm w. I believe I also changed the seals while it was apart. The upper is AUB145551, The lower is AUB145552. I found these parts through the New Holland My Shed app on my phone.
FloGrown81
New member
Awesome thanks alot.
jwstewar
Elite Member
You are welcome, I think the bearings were around $8 each, cups were 6 or 7 and the seals were like 14 or 15. Don't quote me on those, it has been a couple years. I think I rebuilt all 3 of my spindles for around $150.
FloGrown81
New member
And all this was ordered from the app?
Or your local store.
Do you mind if i ask the name of that place see if you ship parts.
Or your local store.
Do you mind if i ask the name of that place see if you ship parts.
jwstewar
Elite Member
Part numbers were from the app, parts were ordered locally through Franklin Equipment in Columbus, OH or Cross & Sons Farm Equipment in Jackson Ohio. Thinking I did the first one from Cross and the other 2 from Franklin - I did the first one in the fall to finish the season because it failed and the other two at the beginning of the following season as preventative - but they weren't bad. Had them apart and changed them anyway since I had them.
Home - Franklin Equipment As far as I know Cross doesn't have a website, he is just a small town dealer but with a huge selection of parts.
Home - Franklin Equipment As far as I know Cross doesn't have a website, he is just a small town dealer but with a huge selection of parts.
FloGrown81
New member
Awesome thanks alot.
Ill give them a call, missed a few calls this week(end) for food plots and shooting lanes. Hopefully ill get this fixed up soon. Thanks again.
Ill give them a call, missed a few calls this week(end) for food plots and shooting lanes. Hopefully ill get this fixed up soon. Thanks again.
MotoRudyX
New member
I was able to find bearings for mine but had to get the seals from New Holland. I still saved a bunch rather than replacing the whole spindle.