alltoys
Silver Member
Where can I get a coupler to go on my PTO for my Montana Tractor.
? about PTO Coupler where to get one
- Thread starter alltoys
- Start date
- Views: 2711
kennyd
Advertiser
Can you be more specific?
Coupler for what? TSC has a lot of generic PTO parts...Agri-Supply online also.
OP
alltoys
Silver Member
Montana Tractor 28 hp with Cat1 3pt system. Probably a coarse thread on the PTO.
bp fick
Super Member
Let's try this. Are you speaking of a PTO shaft to run a mower, bush hog, tiller, etc? The PTO shafts come with the couplers on the ends, one for the implement and one for the PTO at the tractor.
bp fick
Super Member
This is PTO shaft. As you can see, the couplers are on either end.
OP
alltoys
Silver Member
That is what I am looking for I plan on making a soil conditioner. Didn't know they came in one piece.
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 24,646
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
That's actually a Cardan shaft and more commonly known as a drive shaft. Just to differentiate between the implement's drive shaft and the tractor's PTO shaft.
bp fick
Super Member
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 24,646
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Roy, Yeah, I was just trying hard to communicate.
It's cool...
We (including me) tend to use "PTO Shaft" for that drive shaft. Makes for some very confusing posts such as when trying to describe rigging a driven implement (mower or cutter) to the tractor (such as "Connect the PTO shaft to the PTO shaft..." when it should be "connect the driveshaft to the (tractor's) PTO shaft").
Just trying to clarify things...which includes my posts.
bp fick
Super Member
Yes, of course. I call it the pto drive-shaft. Although I did not in the post above. OOOps. The OP should refer to the unit properly, when asking at TSC, Northern Tool, Agri Supply, or a dozen other places to price the one he needs. My experience shows a C note or better. Hopefully, a quality shaft can be gotten for that, but I have my doubts. The Original Poster should also be aware of cutting to fit, greasing the ends, greasing the universal joints, running the safety chains typically provided and so forth. As I understand it, the PTO related injuries are about Number One on the list of serious, even death related incidents. Take care.