About to pull trigger on JD 4300....

[Bird]

J long, you have to be registered in order to post pictures and attachments. Go ahead and register and join the group. It's painless./w3tcompact/icons/wink.gif

 

[jlong]

I replied before, but was not then registered, so I could not provide the side by side pictures that I took when trying to decide between the JD 4400 and the NH TC35D. I went with the 35D and believe it was the most tractor for the money. Both were very close on paper, but when looking at the side by side, the decision was pretty easy. I am now registered, so here are the pictures. Hope this helps. Good Luck. J Long

 

[Golfgar4]

J.Long,

Must've had the lens cap on the camera, cause all we're seeing is gray! /w3tcompact/icons/crazy.gif

 

[jlong]

My previous attachment with the pictures exceeded the 150K byte limit on attachments, so maybe that's why it did not work. Here is a single picture. Thanks for your patience. Jim

 

[Golfgar4]

Nice picture!

Boy, I wish I had a dealer that sold both JD and NH so I could compare them side by side /w3tcompact/icons/sad.gif. About 2 hours from here is a dealer that sells JD, NH, AND Kubota! I'm seriously thinking about going up and spending the day/w3tcompact/icons/smile.gif. What's the down side of one dealer selling all three? Are they going to push whatever isn't selling right then? Anybody have any experience with that situation?

 

[BKColeman]

Nice picture. Do you have any more comparing the two? I was torn between a TC 40D and a 4410. I drove both several times, but never got to compare them side by side like that. I couldn't quite tell how much difference there was in size between the two.

--Brad

 

[John_Mc]

I always figured the JD 4300 was closer to a NH TC33 than to a TC 35