add 3rd function to L3400

   / add 3rd function to L3400
  • Thread Starter
#11  
Thank's knight, I've got to pick up a repair manual. going to order parts,will post how it goes. FeLL is LA463.
 
   / add 3rd function to L3400 #12  
WILLIE, you can buy a simple monoblock lever-actuated spool valve,
like the Prince unit from Northern. Don't forget the Power Beyond
sleeve, cuz your 3-PT is normally powered from the PB of the FEL
valve. You can install your new 3rd function valve between the FEL
and 3-PT. Cost will be $100 for the valve, plus a couple more hoses,
some fittings, and a mounting bracket. No need to spend $800.
 
   / add 3rd function to L3400
  • Thread Starter
#13  
Thanks for the info, I searched northern's site no luck finding anything on a power beyond sleeve,What does it do?
 
   / add 3rd function to L3400 #14  
I used a electric diverter valve on my grapple cost 250.00 including fittings just plumb your tilt cylinders in and out again push button close open grapple release button tilt bucket normally
 
   / add 3rd function to L3400
  • Thread Starter
#16  
I've bought the dirverter valve and base, how do I run the return line ?
 
   / add 3rd function to L3400 #17  
I've bought the dirverter valve and base, how do I run the return line ?

What return line? If you bought a solenoid-operated diverter, it prob has
two pressure inlets from your mechanical valve, and four outlets that
go to your cylinders, 2 to one, and 2 to the other. If your cylinders are
paired, then your diverter outlets get teed into each pair.

I just checked with NorthernTool and you are right that I do not see many
explicit listings for the power beyond sleeves for their Prince valves. A
buyer would probably have to ask to get them. You won't need a power
beyond setup since you are going to divert the flow from a work circuit
on an existing valve.
 
   / add 3rd function to L3400 #18  
I added this an electric over hydraulic control to my M6800. WR Long sells the entire kit, set up specifically for each model tractor. Mine costs around $600 if I remember correctly. My dealer installed it but it would not be too hard to do it yourself. It did require a little welding to attach the quick connect bracket to the FEL. You can go to the WR Long website to see this. They were really nice to work with.
 

Tractor & Equipment Auctions

2015 Ford Explorer AWD SUV (A50324)
2015 Ford Explorer...
2022 Club Car Tempo Golf Cart (A48082)
2022 Club Car...
2005 INTERNATIONAL 7400 STAINLESS STEEL DUMP BODY (A50505)
2005 INTERNATIONAL...
UNUSED LANDHONOR SKID STEER PALLET FORKS (A50460)
UNUSED LANDHONOR...
UNUSED LANDHONOR SKID STEER UTILITY HITCH ADAPTER (A50460)
UNUSED LANDHONOR...
2017 Freightliner 4x4 Service Truck with Crane, VIN # 1FVDCXDT8HHHS8739 (A48836)
2017 Freightliner...
 
Top