Adding a New to me M6060

[PSDStu]

Here is a pic of my New to Me M6060 at the dealer waiting for my new Landpride RCF-3096 Rotary Cutter to come in which was ordered yesterday.

This is a 2 year old M6060 which my dealer owner used at his Peanut Coop to pull peanut wagons. It has 518hours.

It comes with 2 rear remotes, a rear working light, Canopy and about 800lbs of front weights.

Dealer has changed oil, hyd fluid, fuel filter, and air filters.

This will be used for Bush Hogging some large areas I have.

I may add a loader later, but my L4060 covers my loader needs pretty well.

 

[BigBoyToys]

That is one heck of a nice looking machine! Congrats.

 

[ovrszd]

Very nice. That tractor will serve you well. Should handle an 8' brush cutter with ease. I run a 10' on my 9540 and never have a HP problem. Congrats!!!!

 

[PSDStu]

Very nice. That tractor will serve you well. Should handle an 8' brush cutter with ease. I run a 10' on my 9540 and never have a HP problem. Congrats!!!!

I was going to go with a Brown 417 but was a little worried about the tail wagging the dog.....

 

[TripleR]

Congratulations, the M6060 is a really nice machine, looked at one when they first came out, and as mentioned an 8' will be great with it. We have an M and really like it.

 

[oosik]

Nice tractor. I think your unit could handle the Brown 417. I wish there were a Brown dealer near me. The weight of the 417 is a tad more than your implement list recommends but I have found the list is very conservative. Anyhow - most all my implements are Land Pride and they have performed flawlessly for many, many years.

You will enjoy using your new tractor.

 

[R_Walter]

Nice looking unit.

 

[TomSeller]

Very nice looking tractor and very useful size and very low hours. I'd keep my eye out for a good buy on a loader for resale if nothing else.