Additional Lights without alternator upgrade

bluecon1 · Oct 13, 2004

And Another

bluecon1 · Oct 13, 2004

And the Electrical Panel for lights and heater

bluecon1 · Oct 13, 2004

This is a picture of the front blade I re-vamped from a bent up rear blade I found. I took the bucket cylinder off my loader and use it as an angle cylinder on my blade. Works great, but I'm sure I could bend the loader arms if I got going too fast and hit something. Worked it all last season with no problem.

bluecon1 · Oct 13, 2004

This is a picture of a cheap winch I bought to change the angle of the snow blower chute, without having to un-valcro the cab every time. I have just completed this, so I have zero hours on it. Works well in the heated shop, we'll wait and see what it does with a bit of snow caked on it. I will probably build some sort of a cover yet. I also welded two 3/8" nuts to the chute and threaded grease nipples
in them so that I could grease the chute rotation properly.

TobyH · Oct 13, 2004

I was beginning to think that I was nuts trying to configure my rear blade to the loader arms. Nice work. I'm really getting tempted to get a welder. Great idea using the bucket cylinder to angle the plow. You don't even have to disconnect the hydraulic lines. I'm impressed!