Advise? Remote hydraulics on 2004 John Deere 4410 E-hydro

[Berniesimber]

Help a Brother! :confused2: I have read some threads on adding remotes, but am unsure of how best to accomplish what I want to do. I would like to add a grapple or 4n1 bucket on the front, but would also like to add 1 or 2 remotes on the rear. There was a factory kit for the rear, (LVB25084) but, it is no longer available as a kit. You have to buy in pieces, and it only gives me one set of remotes. Any advise from you guys that have done it would be greatly appreciated.

Sincerely,

Bernie

 

[dfkrug]

Your factory loader valve has 3, rather than the usual 2 valves. The control handle
for the 3rd is optional. I have made my own remote handle for the 3rd, as well as
adding valves after the factory valves in the power-beyond loop.

Here is one thread I did, if you want to wade thru it to find the hydraulic parts.

http://www.tractorbynet.com/forums/...n-deere-4300-complete-rebuild.html?highlight=

 

[Berniesimber]

thanks dfkrug! I will wade through it.