Agri 72" 3pt Mower - Help

[shadled]

Agri 72\" 3pt Mower - Help

This past weekend I picked up a slightly used Agri 72" 3pt Mower. The only problem with this mower is the plate which the gearbox attaches too is bent. So I need to remove the gear box. But before I can remove the gear box I need to remove the round spinner on the underside that the blades connect to. I removed the jam nut, but I am not sure what I need to remove next to get the round spinner off.. Does anyone have any ideas or a link to a manual for this mower.

Thanks,

Dennis

 

[OhioGuy]

Re: Agri 72\" 3pt Mower - Help

Hi Dennis,
Is this a Brush Hog/Rotary type mower or a finish mower. If its a rotary you might be able to go to King Kutters web and look at the rotary mower manuals. They MAY be constructed similarly.

Is this an AGRI Agri Fab and where's it made?

Curt

 

[sweettractors]

Re: Agri 72\" 3pt Mower - Help

Partially loosen the castle nut from the flywheel, until the end of the threads are protected on the outputshaft. Then while someone helps put down pressure on the flywheel, you hit the castle nut on the end of the shaft. This should break loos the flywheel from the tapered spline on the output shaft (sorta like removing a steering wheeel from a car)--Ken Sweet
Sweet Farm Equipment LLC *New Disc Mowers and Hay Tedders Ready to Ship*

 

[shadled]

Re: Agri 72\" 3pt Mower - Help

I will give that a shot.. Thanks again for the help.

Dennis