Air Bound

   / Air Bound #1  

Anonymous Poster

Epic Contributor
Joined
Sep 27, 2005
Messages
29,678
YM1500. Changed fuel filter. filled bowl and filter.(overflowing as I tightened it)cranked. almost started. now it wont start.

Air Bound?
Where to bleed from and what's the procedure?

Thanks
 
   / Air Bound #2  
There is a hex nut (about 12 mm) with a phillips drive, above the filter a few inches, as I remember. When I changed the filter in mine, I loosened that nut until fuel ran out. Then I tightened it and was able to start the tractor with no problem.

reb
 
   / Air Bound #3  
Correction: It is a hex bolt head, not a nut. This #@?! computer isn't smart enough to print what I mean. /forums/images/graemlins/blush.gif

reb
 
   / Air Bound #5  
There is a thread here somewhere that has really good instructions on bleeding the fuel system. Have you tried searching the forum? Do you have the manuals? It is in there too.It isn't too hard but the EPA would probably have a heart attack if they ever saw us doing it.

Chris /forums/images/graemlins/shocked.gif
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
McDon 75s 40' Flex Draper Head (A52349)
McDon 75s 40' Flex...
2018 FREIGHTLINER CASCADIA TANDEM AXLE DAY CAB (A52576)
2018 FREIGHTLINER...
2020 INTERNATIONAL LT625 (A52472)
2020 INTERNATIONAL...
2014 International WorkStar 7400 Truck, VIN # 1HTWGAAR9EH765325 (A51572)
2014 International...
2015 Kubota RTV-X1100C (A52748)
2015 Kubota...
 
Top