slammer3364
Bronze Member
- Joined
- Nov 27, 2010
- Messages
- 53
- Tractor
- Jinma 284
anyone know the air pressure on Jinma 284 front and rear Thanks Slammer
Tires air pressure
- Thread starter slammer3364
- Start date
- Views: 4469
Gary Fowler
Super Star Member
- Joined
- Jun 23, 2008
- Messages
- 11,998
- Location
- Bismarck Arkansas
- Tractor
- 2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
Max air pressure should be listed on the tires although you may not wish to put maximum pressure in the tires especially on the rear. I find that rear tires pretty much work for all sizes with around 12 PSI. You want just a bit of squat/giveto the tire when you have the heaviest piece of equipment on it. This gives the smoothest ride and best traction.
Fronts take a lot more especially if you are running a FEL. For my fronts with FEL, I usually run about 10 PSI below max pressure. That allows me to carry max load without fear of running the tire off the rim.
Fronts take a lot more especially if you are running a FEL. For my fronts with FEL, I usually run about 10 PSI below max pressure. That allows me to carry max load without fear of running the tire off the rim.
RonMar
Elite Member
The pressure on the chinese tires will also be in BAR so you need to convert it to PSI
