Price Check All set to buy !

   / All set to buy ! #11  
Make sure you are comparing apples to apples. The Sc2450 appears to be much closer to the Deere 2305 than the 2320. The Sc2450 and the 2305 are both subcompacts with similar specs. The 2320 is larger, has more capacity and isn't in the same class.

The Cub may be your best choice but if you are trying to compare prices you need to make sure you are comparing the same class of tractors.
 
   / All set to buy !
  • Thread Starter
#12  
Make sure you are comparing apples to apples. The Sc2450 appears to be much closer to the Deere 2305 than the 2320. The Sc2450 and the 2305 are both subcompacts with similar specs. The 2320 is larger, has more capacity and isn't in the same class.

The Cub may be your best choice but if you are trying to compare prices you need to make sure you are comparing the same class of tractors.


Yes you are correct but I was going on the BH attahment.
CCY 2450 is part of the package.
Not sure if the 2305 will take a BH and the noise the little tractor makes is more than the Kioti and the CCY.
The Kitoi CK20 is nice but pricey and the BH needs extra valving and who know what else.
The CCY comes all set and it is relatively more quite than the JD.
 
   / All set to buy ! #13  
I couldn't comment on the noise, never seen the Cub. The 2305 does come with a BH package. It's a nice setup I had a chance to try one when I bought my tractor.
 
   / All set to buy ! #14  
The quote of $17,950 is for a Sc2450 TLB w/3 pt Hitch Hookup, 12" BH Bucket, 48" Box Blade and Grader Blade ?

Asking for a Block Heater and wheel weight, either loaded tires (which are small) or wheel weights. I am sure the loaded tires are less expensive than the weights so that is what he will offer.

I can get an Sc2450 as above plus a few little extras for $16.9K, a $1.5K difference, just one state over, 500 miles.
I am thinking that it will be better for servicing if I buy local and it might keep the dealer in business, might be worth the $1.5K.

Any opinions ? LoL

How about if you go to your local dealer and show him the price you can get it for in NY? He might match it, or at least get closer....
2450 is a nice little rig. I drove a 2400 around and really like the shift-on-the-fly.
Good luck!
 
   / All set to buy !
  • Thread Starter
#15  
How about if you go to your local dealer and show him the price you can get it for in NY? He might match it, or at least get closer....
2450 is a nice little rig. I drove a 2400 around and really like the shift-on-the-fly.
Good luck!

Ben there done that !
His response was, this guy giving them away !

I e-mailed the local guy and asked him when a 2450 would be in, three or four days ago, he will not respond at all. I even said I have thought over what he said about local service and thought it would be a good idea to buy local.

That is the way the ball bounces.
 
Last edited:
   / All set to buy ! #16  
Ben there done that !
His response was 的s this guy giving them away !

I e-mail壇 the local guy and asked him when a 2450 would be in, three or four days ago, he won稚 respond at all. I even said I have thought over what he said about local service and thought it would be a good idea to buy local.

That痴 the way the ball bounces.

Well if he's not responding that would seal it for me. When I lived in MI, I had a Cub dealer 1.5 miles from my house. I went there 3 times for small parts. These guys were very slow, and I knew more about the machines than them. After the 3 attempt (strike 3) I vowed to never go there again. I order my parts from other dealers and actually get a better deal even with shipping.
None of my Cubs have ever been in the shop for servicing or repair....so I prefer to shop for price.
I would pocket the $1500 and buy in NY....
 
   / All set to buy !
  • Thread Starter
#17  
X2 on that…
The funny thing was when I asked for different pricing vs the NY Dealer, I told I was going to the other dealer and he played the Service Card.
I figured he would come back to me when I said I have thought about his comments on local purchases but No!

Too bad, I will be borrowing the next door trailer and see take a trip.

ltr
 
   / All set to buy ! #18  
The Sc2450 TLB compares directly to the much more common Kubota BX25, MF GC2410, and JD 2305. Have you looked at these? Pricing should be very close or lower than your local dealer has quoted.
 
   / All set to buy !
  • Thread Starter
#19  
The Sc2450 TLB compares directly to the much more common Kubota BX25, MF GC2410, and JD 2305. Have you looked at these? Pricing should be very close or lower than your local dealer has quoted.

Yes I did also check the same line of tractors but what I did was go out, look at what I liked and then compared what each had to offer vs price.

As it goes I ordered a CCYanmar Sc2450 TLB.
My local dealer wouldn稚 get back to be even when I kissed his @ss telling him he was correct in the service thing and doing business locally.
I ordered the Tractor on Sat, they were busy so I will finalize the order tomorrow and it will be delivered 250 miles on Friday, all for $1500 less than local and the Dealer is throwing in a lot of small items free.

I will now need to find a Service Dealer other than the most local guy and then all should be good, his loss. I am glad for him since he can afford to refuse sale and service money.

I can do the basic stuff myself but if it needs more than that I will have to travel a little.
 
   / All set to buy ! #20  
looking forward to pics and a full report!
 

Tractor & Equipment Auctions

1977 Allis Chalmers 7060 Tractor (A50514)
1977 Allis...
2015 VOLVO VNL SINGLE AXLE DAY CAB (A51222)
2015 VOLVO VNL...
2021 Western Star 4700SF Tri Axle Dump (A47384)
2021 Western Star...
2015 FORD F350 SERVICE TRUCK (A51222)
2015 FORD F350...
UNUSED CFG Industrial MX15RX Mini Excavator (A47384)
UNUSED CFG...
1999 Sandbagger G-4 Hopper (A49462)
1999 Sandbagger...
 
Top