Almost crushed by BX
- Thread starter lfkfire
- Start date
- Views: 9310
TripleR
Super Star Member
- Joined
- Mar 5, 2009
- Messages
- 18,538
- Location
- Missouri
- Tractor
- Kubota M8540HDC, L5740HSTC, BX2200, BX2660, John Deere 425&1025R, Case, Massey Ferguson, Ford
We bought a long rubber hose for our grease gun and can grease ours on our BX2200 and BX2660, but you have to have the shaft turned just right, a hair one way or the other makes a difference.
We tried the method you are using a few times when we first got ours and it was just too much trouble. When you get use to it, it is not that bad, notice I didn't say "easy". I can't get down that low anymore so my wife now does the deck maintenance on them.
TripleR
Super Star Member
- Joined
- Mar 5, 2009
- Messages
- 18,538
- Location
- Missouri
- Tractor
- Kubota M8540HDC, L5740HSTC, BX2200, BX2660, John Deere 425&1025R, Case, Massey Ferguson, Ford
A few weeks ago I had one of those "help, I've fallen and I can't get up" moments. My wife trying to get me up looked like a Laurel and Hardy movie.:laughing:
powerpace
Veteran Member
Been to many emergency calls with a person under a vehicle. A few were just trapped and had various injuries but survived. Several died quickly. In the case of those that survived a second party was always present. Always chock and block any rolling equipment even on level ground.
Defective
Platinum Member
Let's update this statement...
Always chock and block any rolling equipment and lift it ONLY on level ground.
powerpace
Veteran Member
I have never been able to choose where my equipment breaks down. Most recently while digging stumps on a grade. Hydraulic hose with a pinhole leak.
Defective
Platinum Member
But...did that breakdown absolutely require lifting the machine in place? If at all possible, I would find a way to move the machine to level ground for any repair involving a jack. Even a flat tire will generally roll enough to get the machine into a safe position for repair.