Another John Deere 1050 hydraulic problem.

[krisbodean85]

can the 1050 be hooked up back like it was without a front end loader? does anyone have a pic on how it hooks up? if i hook it back up like if it didnt have a front end loader i can eliminate alot of things to have to check and it would narrow it down to the joystick control valve

 

[Rock knocker]

How goes the battle?

 

[krisbodean85]

Well thought I would update on this headache I’ve had on this tractor for a long time finally solved the problem

 

[beenthere]

Thanks for that update. Hope all is working ok now. Been a tough row-to-hoe for you.

 

[Matt1050]

Hi . I’ve read through this thread. I have the same tractor 1982 JD 1050.

I want to eliminate the old two stick auxiliary controls and replace it with a joystick.

Did anyone get this set up working?

 

[beenthere]

Hi . I’ve read through this thread. I have the same tractor 1982 JD 1050.

I want to eliminate the old two stick auxiliary controls and replace it with a joystick.

Did anyone get this set up working?

:welcome: to TBN

Which setup are you referring too?

 

[Matt1050]

:welcome: to TBN

Which setup are you referring too?

The set up I知 referring it is using the 7 port Cross joystick valve body.

I saw the pictures and write ups but I never saw if he got it working properly.

This setup was to control the FEL as well as supplying hydraulics to the three point hitch still

In the mix I have power steering as Well

 

[Matt1050]

I’ve sent a pm to the gentleman who had the original questions on putting a joystick on his tractor.

Does anyone have any idea of the final results?

 

[krisbodean85]

its works awesome now. i replied to your pm