Another new saw

[Kiotikarl]

Well after having purchased my MS362, and found out it was a little underpowered, i decided to buy something with a little more power. So here it is a brand new MS441.

 

[newbury]

Nice little saw, get it dirty.

 

[creekbend]

Nice saw. It should get the job done.

 

[LD1]

That should do the trick:thumbsup:

 

[20 20]

purty

 

[B8FISH]

nice! Did you put the lines on the caps--I like that idea for aid in lining up when re-installing.

 

[Treemonkey1000]

Go big or go home.. Nice looking saw. Is that like an 18" bar? Have fun. Wear your Safety chaps.:cool2:

 

[Kiotikarl]

Go big or go home.. Nice looking saw. Is that like an 18" bar? Have fun. Wear your Safety chaps.:cool2:

Actually it's a 16 inch bar, will move up to an 18 inch later. Btw had to get all my safety gear changed, boots, chaps, helmet,etc ... can't operate a Stihl saw with Husky safety gear:laughing:

 

[94BULLITT]

Nice saw. Also a lot of people don't know it but in a Stihl saw you are supposed to run mid grade gas.

 

[Treemonkey1000]

Actually it's a 16 inch bar, will move up to an 18 inch later. Btw had to get all my safety gear changed, boots, chaps, helmet,etc ... can't operate a Stihl saw with Husky safety gear:laughing:

Yeah that would be an insult to Husky wouldn't it? 16" bar gee that would be like dropping a 454 Chevy motor into an old Vega body... WOo hooo!

 

[JoeBuyer]

I have a MS441. Great saw, very smooth, with a wide torque band.

 

[s219]

So is it an M-tronic model? (No carb adj. screws on that one).

 

[Kiotikarl]

So is it an M-tronic model? (No carb adj. screws on that one).

It's not an M-Tronic model, i didn't want that, I had lots of cold starting troubles with my Autotune models.

 

[PineRidge]

I have been a fan of Stihl for some years. They start easy and run well. I'm sure you'll enjoy yours as well.

 

[Artisan]

Better send me that underpowdered 362 so I can check it and make sure.
Ain't doin' ya any good now anywho. Best to just get rid of it ya wreckin'?

 

[Treemonkey1000]

Yeah I think Artisan has a point there......

 

[Kiotikarl]

Patience my friends, I'll get ride of the 362 only next year I replace all my saws yearly

 

[stihlman]

I have a 441 M-Tronic and run a 28" bar with no problems. I have not had any cold or hot start issues with it at all. As to a 362 being underpowered, they need several tanks through them to break in, then I opened the muffler up and it really came to life enjoy your saws

Steve

 

[Turbys_1700]

Nice saw...
Lots of power and nice balance...
Top of the line...

 

[Bluegill2]

Since you replace saws every year, it wont be long before all your saws are M-tronic, or Auto tune.

It's coming!