another vickers pump question

[dodge85rc]

trying to find some specs on a hydraulic pump I got. The letters in the casting are hard to read so not sure if these are right.

It is a Vickers pump, looks like a 105-c-12 ? It is a square housing if that matters.

Thanks!

 

[dodge85rc]

Anybody?

 

[George G]

Best I can do, is guess. A V-105 pump would be round, so, I know that can't be it. The only thing I can find that might be close would be V210-5-1C-12-S214. That would be a vane pump. Rated @ 5.4gpm @ 100psi & 1200rpm, and 4.3gpm @ 2000psi & 1200rpm. And a max rpm of 1800. I'm not sure where the model number would be stamped.

 

[dodge85rc]

I'll try to take a wire wheel to it and try to clean it up and see what numbers are really there. Thank you

 

[dodge85rc]

Where do you get your specs from?

I have another pump/motor I need to find specs on too.

It is a hydreco 1510c3c1

 

[dodge85rc]

Anybody know any good websites to find specs on hydraulic equipment?

 

[ol'George]

hydreco is an old name.
I remember mentioning that name back in the '60's
i don't know /can't remember much more
maybe you can find something here for the vickers pump
http://devcocorp.com/american/vickers_vane_v.pdf
maybe post a pix?
google vickers or eaton I bought some seal kits for my V 210 pumps a few years ago and remember finding a link to those pumps.
the identification is
on the rear housing it should be stamped and the model and cartrage installed