Anyone added power steering to their Massey?

[Jimtrucker]

Can you get these kits to fit the continental engine?

 

[ostlandr]

Just got myself a '64 MF 35, and I am going to convert it to power steering. They make both pumps (for the Perkins with straight-cut teeth on the drive gear, and for the Continental with the curved teeth on the drive gear. Bad news is, the Continental pump costs $500-$600 as opposed to $150-$200 for the Perkins pump.
I plan on getting the conversion kit (which seems to come with the Perkins pump) and a Continental pump, then putting the unneeded pump on Ebay.

Perkins Pump part number is 773126M92. Continental Pump part number is 544443M91.

 

[gfulton]

Sir, I know this is an old post but I'm trying to do the same thing on my MF 135 with the Continental engine. How did this conversion work out for you?

 

[Bruce MF202]

Hello gfulton, i just posted this question today so sorry i can't help you out, i have everything mounted on the tractor, but no hoses in place, nothing in my manual shows the power steering hoses, in the engine section is shows the power steering pump mounted to the engine block in the front gear driven. as for the hoses well that's a different story

 

[MPitrucha]

I was wondering the same thing. My 1020 (DA5220) has no PS but it would be nice. They sold a kit for it but I googled the part# and nothing comes up. If you find something let me know or post it here.

I added electric power steering out of a Prius to my 1020 and it works like a charm