anyone build a
- Thread starter Jazbota
- Start date
- Views: 2984
bulldog69
Silver Member
- Joined
- Apr 29, 2010
- Messages
- 155
- Location
- Rocky Face, Georgia, USA
- Tractor
- Kubota L 3000DT/ M 9000 DTC
I may not be understanding what you mean so this may be a stupid response.
When I need both on one job and I'm driving the tractor I carry the bucket with my forks. If I'm hauling it I set my forks on the trailer from the side and park the front tractor tire one one fork to hold it in place during transport.
When I need both on one job and I'm driving the tractor I carry the bucket with my forks. If I'm hauling it I set my forks on the trailer from the side and park the front tractor tire one one fork to hold it in place during transport.
tcreeley
Elite Member
Are you referring to this?
Titan 3 point hitch Pallet Fork Attachment Category 1 tractor carryall 3PT-PF
$295.00Buy It NowFree Shipping
3 Point Forks | eBay
Titan 3 point hitch Pallet Fork Attachment Category 1 tractor carryall 3PT-PF
$295.00Buy It NowFree Shipping
3 Point Forks | eBay
Sorry I may of explained that poorly. I have a tine fork which goes on my loader via euro hitch. I want to build a 3 pl one side euro hitch on the other to hook my loaders fork or bucket or silage bale grab to the 3 pl wi th out any welding on the front end loader attachments.
Mainly for fun buy so that I could carry a hay bale on the rear and dig a hole with the bucket on the front.
Mainly for fun buy so that I could carry a hay bale on the rear and dig a hole with the bucket on the front.
FreshRouteFarm
Silver Member
- Joined
- Nov 10, 2011
- Messages
- 148
- Location
- Burtts Corner, New Brunswick Canada
- Tractor
- Case IH 485, David Brown 995
Something like this is what you are looking for?
3pt hitch Adaptor for Quick Attach on Loader attachments
3pt hitch Adaptor for Quick Attach on Loader attachments
Tor Arne
Gold Member
- Joined
- Aug 10, 2010
- Messages
- 325
- Location
- Norway
- Tractor
- Same Explorer 65, MF 135, MF 30, MF165, Volvo BM 55, Volvo BM 425, Volvo BM 2254, Terengmester skidder, Ford 3000, Fordson major, Derreng unknown model, IH B275, MAN 4R2, Gutbord sub compact.
In my corner of the world you can buy them so cheap that it does not pay to make them yourselfFallon
Super Member
Buying an adapter to put a SSQA interface on the 3pt costs more than 3pt or SSQA pallet forks. Pushing a grand or so, crazy expensive to buy or build. I was looking at making one, but never got to it. Ended up finding a 3pt forklift mast with forks in need a little TLC for $200. That ended my quest for a rear adapter.
I welded a used quick hitch to a SSQA plate for the loader. Cost me $100 or so ($300-400 if you get parts new). Love being able to pick up 3pt implements on the loader. Makes moving, loading, maintenance & general handling a breeze. Its also the mount & float hinge for my converted truck snow plow.
I welded a used quick hitch to a SSQA plate for the loader. Cost me $100 or so ($300-400 if you get parts new). Love being able to pick up 3pt implements on the loader. Makes moving, loading, maintenance & general handling a breeze. Its also the mount & float hinge for my converted truck snow plow.
