Anyone have pics of power assisted steering valve and cylinder on their Yanmar?

   / Anyone have pics of power assisted steering valve and cylinder on their Yanmar? #11  
I have a YM226D with a YM186 power steering kit on it and need some help finding a tie rod for it. The tie rod on the end of the hydraulic cylinder broke and I can't find one anywhere. Could anyone tell me where I can pick on up?
 
   / Anyone have pics of power assisted steering valve and cylinder on their Yanmar? #13  
I will give them a call. I ordered a tie rod from Hoye hoping that it would be the same size as the one I need because the manual above says you reuse the factory tie rod from the drag rod. The one I got from Hoye is too big and the part number (TR-1813) is the same as Hoye's, so I am hoping it won't be the same. I appreciate the info.
 
   / Anyone have pics of power assisted steering valve and cylinder on their Yanmar? #14  
Is your hydraulic cylinder pushing on the Tie Rod (the side to side rod) or on the Drag Rod (forward from steering box to axle, Fredricks page 66)?

Can you post some photos of what broke?
 
   / Anyone have pics of power assisted steering valve and cylinder on their Yanmar? #15  
The hydraulic cylinder is pushing the tie rod It is part number 5 in the attachment. scan0003.jpg
 
   / Anyone have pics of power assisted steering valve and cylinder on their Yanmar? #16  
I have those tie rod ends in stock.
I will PM you
 
   / Anyone have pics of power assisted steering valve and cylinder on their Yanmar? #17  
I'll look for your PM.
 
   / Anyone have pics of power assisted steering valve and cylinder on their Yanmar? #18  
Here's one I put on my YM2020. Be careful, my cylinder is not long enough and I lost about 1/3 of my turning radius.

Hi Eddie,
I know this is an old old post but the photos look exactly like the unit I need t rebuild.
It's markings: Modular Controls PSC-2117B-12.75-5.
Any info you can provide on yours would be appreciated.
Thanks
Bob
 
   / Anyone have pics of power assisted steering valve and cylinder on their Yanmar? #19  
I have those tie rod ends in stock.
I will PM you

Digging up an old thread from the past. Trying top track down a replacement tie rod for my 330d power steering cylinder

I found a perfect match from Italy, but I need to find one in NA! LOL

For anyone else who falls down this particular rabbit hole Tie rod end - SHP291KR -

Kramp -

KRAMP


BTW Moog comes close, but these things are short and I am not sure there is enough thread closer to the rod end

Front Right Outer Tie Rod | 1997-23 Ford F-15 | MOOG

Thanks for any suggestions
 

Tractor & Equipment Auctions

2024 Bintelli ActivEV Pulse Electric Golf Cart (A51694)
2024 Bintelli...
SHOULE LN-16 LOT NUMBER 132 (A53084)
SHOULE LN-16 LOT...
2016 LINK-BELT  235X3 SPIN ACE EXCAVATOR (A52472)
2016 LINK-BELT...
Tradewinds Power Unit (A50120)
Tradewinds Power...
2015 HINO XJC740 BOX TRUCK (A52576)
2015 HINO XJC740...
2018 John Deere 1653 (A52748)
2018 John Deere...
 
Top