Tires Are there any wider tires for JD 3320 available?

[FoxHole]

Looking for rear tires for JD 3320 that would make the rear of the tractor look wider than the original pare that it came with. I have the 43x16.00-20 R4痴 on the back and the 27x8.50-15 R4痴 on front. I know it takes a certain ratio with all 4 tires to keep the four wheel drive to work properly. I'm looking to get at least 4-8 inches wider on each side of the rear tires.
Is there anyone that knows if there are wider tires that would be able to work on this type of machine?

 

[Willl]

How 'bout wheel spacers ?

 

[FoxHole]

Thats an idea
Wow! Now you got me thinking. How about the ability to have duals on back? I'm sure i would have to have some one make me some, but how much spacing you think i can get away with using wheel spacers? Can this be done right to where you can get atleast 4 inches on each side?

 

[CinderSchnauzer]

If you want Hub Extensions - try here - not cheap though.

Unverferth Wheel Hub Extensions

 

[Nuru]

I have Turf specials and they get my rear width out to 64 - 66 inches and that increases the stability quite a bit.

 

[Nuru]

I have Turf specials and they get my rear width out to 64 - 66 inches and that increases the stability quite a bit.

Is this a cab tractor or an OS tractor?

My Galaxy Turf Specials are:
25-10.50 LLx15
41 LLx18-16.1


Also take a look at this thread, i started out looking to do the same thing as you on my former 4310 and then the same for my current unit a 3520.

http://www.tractorbynet.com/forums/jd-owning-operating/96452-hub-spacers-5.html

 

[nmu98]

Those are the larger R-4's. There has been talk on here that some of the bobcat extensions work on the 4x20 series. Some of the smaller stuff might work on the 3x20, and they were very affordable.

Do you have the R-4 tires turned to the wider setting?

 

[FoxHole]

nmu98;
Yes, but I was kind of desapointed with all that work changing them & only giving me 1/2'' on both sides. I will look into the bobcats extensions though & see what I find. Thanks everybody for your replies. Good suggestions.