Attachment Mods to fit JD I-Match Help

[beenthere]

Seems this kit has a couple extra bushings. Not sure. They may be for a different application and be a universal kit overall.

The ones to the right (your right arrow) I believe are for the top hook to engage (the top hook of iMatch is Cat II whereas the lower two bushings fit the Cat III of the lower iMatch hooks.

As far as bushings coming with the ballast box, mine did not and ordered them extra (LVU12858 bushing kit), however some recent Deere literature I picked up this morning on the 3520 states that "Bushings are required for attachment to Cat I pins. One set of bushings sent with each hitch" so I gather the salesmen are keeping the price down or getting some extra bushing kits, either or.
With the SpeeCo, I see that one set of lower bushings come with the hitch. Just saw it on sale for $159 too.

 

[JasonL]

beenthere-
Do you mind me asking where you saw the Speeco QH? My local TSC does not carry it. THANKS Jason

 

[beenthere]

The store I was in was a FarmFleet store, this particular one was in Baraboo, WI.

I was in Madison, WI once and there is a spin-off store (Phil's Tractor Supply) that also carries the SpeeCo.

Also, do a web search on SpeeCo, and see if there is a local or close dealer that may be able to help you out.

Good luck.

 

[Cliff_Johns]

</font><font color="blue" class="small">( Seems this kit has a couple extra bushings. Not sure. They may be for a different application and be a universal kit overall. )</font>

Hey, cool. My picture of the bushing kit raises again.

As I remember, that photo included two or three bushings that were wired to the I-Match when I bought it. The rest of the stuff I got in a separate bag for the ballast box. I don't remember which of the bushings on the left came with the I-match and which were with the kit anymore. Sorry.

Cliff