3-Point Hitch Attachment Point Pictures Required !!!

[millhaven_nice_guy]

Hi everyone !

I bought a 6 1/2' fisher plow complete with harness for my Massey 1532. I see most of you guys adapt the plow to the FEL but I assume that is because you don't have a complete plow available so you use the FEL to lift the blade and the bucket valve for angling if you have that option. I want to connect the complete plow to the tractor frame. How do the factory dozer blades and front mounted implements attach? I need to widen the frame out to 29" to accept the plow. I don't want to wreck the frame of the tractor! I especially would like to know where the front gets braced back to?

A picture would say a thousand words but I didn't take any yet. I would really appreciate either some pictures of the factory front "Quick Hitch" or some scans of the exploded view in the installation manual!

Thanks

 

[mchasal]

I know it's been forever since you posted this, but it's not winter yet, so there still may be time

The factory plow mounts with 4 bolts up front on the frame right behind the brush guard, there should be some threaded holes there. In the rear it actually mounts all the way back to the drawbar with a saddle and 2 big bolts through it. This is where the load really goes, so it's a very strong attachment.

I'll try and locate or take some pics if it would be helpful. You can see the front mount in a couple of the pics in my gallery link in my sig.