pilot-werx
Gold Member
Stupid question of the day because the dealer is closed and my manual is at the shop.... Does the front axle use the same hy-gard low viscosity fluid as the rest of the tractor?
Oil & Fuel Axle fluid
- Thread starter pilot-werx
- Start date
- Views: 10016
kebo
Elite Member
- Joined
- May 16, 2006
- Messages
- 2,931
- Location
- Lexington, SC
- Tractor
- 2001 John Deere 790 4x4, bar tires
The manual for my JD 790 states to use John Deere GL-5, SAE 80W90 in the MFWD front axle. Don't know if your 4210 would be the same, but I doubt it would use a different type of fluid??? Maybe another can check their manual and say for sure.
Glen Watkins
Gold Member
- Joined
- Dec 19, 2009
- Messages
- 491
- Tractor
- 2007 John Deere 4320 Cab Tractor
My 4320 uses John Deere Low Viscosity HY-GARD transmission/hydraulic fluid for front axle and tranny. Here's a link for owners manuals.
Operator's Manuals for John Deere Equipment
Operator's Manuals for John Deere Equipment
TCSavage
Bronze Member
- Joined
- Jan 13, 2004
- Messages
- 69
- Location
- Lakeland Shores, Mn
- Tractor
- JD 4210 eHydro, F725 w/54" deck
My 4210 uses Hy-Gard low vis in the front axle - same as the rest of the unit.
etcallhome
Platinum Member
2305 uses 80w90 for front axle
etcallhome
Platinum Member
From manual for your 4210
Add approximately 4.5 L (4.7 qt) of John Deere Low Viscosity HY-GARD (J20D) or HY-GARD (J20C) or equivalent into dipstick filler opening.
Add approximately 4.5 L (4.7 qt) of John Deere Low Viscosity HY-GARD (J20D) or HY-GARD (J20C) or equivalent into dipstick filler opening.
