I recently purchased a used B2400 and after about 24 hours of mainly bush Hogging light vegetation I noticed transmission/Hydraulic Oil dripping on the left rear tyre. I found out that the oil was leaking from the rear axle oil seal. I also noticed a trace of the same kind of oil in the vicinity of the joint between the rear of the engine and the transmission.
I have ordered the appropriate seals and am now seeking advice as to how to go about changing the seals. Any repairs will have to be done on the farm since it is in a remote area involving crossing it over a river on a make shift barge. Is this something that a reasonably mechanically inclined person can do? Thanks in advance. Incidentally I am in Belize in Central America.
Al
I have ordered the appropriate seals and am now seeking advice as to how to go about changing the seals. Any repairs will have to be done on the farm since it is in a remote area involving crossing it over a river on a make shift barge. Is this something that a reasonably mechanically inclined person can do? Thanks in advance. Incidentally I am in Belize in Central America.
Al