Snow B2781A lube

   / B2781A lube #1  

wschapinjr

New member
Joined
May 13, 2012
Messages
15
Location
Maine
Tractor
kubota B2620
Just acquired a B2781A blower and while going over the manual I note that the chain should be lubed every 4 hours or after every use. No big deal as I am used to doing that with my 2750 and have a bunch of saw chain oil. However.......the chain guard was designed by someone who proably never will have to remove it to lube the chain. There are two bolts holding the guard, one is on top and readily accessible, the other is on the bottom of the female hitch. NOT USER FRIENDLY! I am tempted to run the guard with but one bolt as that should hold it in place yet make access to the chain user friendly. Might rattle a bit but whats a bit more noise?

Anyone run into this ? Comments?
 
   / B2781A lube #2  
I bought a can of motorcycle chain lube....... it comes with the straw-like thing similar to WD40. Ne need to remove the cover. Lubing every 4 hours is not realistic,but do keep it lubed. My B2782 has been running flawlessly for 5 New England winters now.
 
   / B2781A lube
  • Thread Starter
#3  
I'm off to NAPA to see if I can find a can of Motorcycle chain lube
 

Tractor & Equipment Auctions

cummins generator (A56857)
cummins generator...
4 Unused Montreal ST205/75R15 Trailer Tires (A55787)
4 Unused Montreal...
500BBL WHEELED FRAC TANK (A58214)
500BBL WHEELED...
2008 Sterling Acterra Ambulance (A56858)
2008 Sterling...
2017 Genie GTH-5519 (A53317)
2017 Genie...
2020 DRAGON ESP 150BBL ALUMINUM (A58214)
2020 DRAGON ESP...
 
Top