B3200 with cultipacker

[btrow]

Hi folks. Looking for some feedback from anyone with experience using a cultipacker with a b3200. I am planting food plots. Most all seed products indicate the need of a cultipacker to achieve best results. I need a 5' 3pt hitch type cultipacker. 5' foot so it will cover my tire tracks, and yet still be narrow enough to get on and off my trailer.

I found one manufacturer that tells me their implement will work with my b3200, but others have expressed concerns with the weight (700 lbs), and the height of the top link pin which would make it difficult to raise high enough to get on and off my trailer.

Any thoughts on the weight, or any other recommendations for another implement that will do as good as the cultipacker, but possibly not carry the weight, and overall size? Thanks in advance for your adivce!

brow

 

[Johnret]

I ran into this problem with my L3430. On my three point hitch, I adjusted the raise arms so they would raise to the highest point they could. I purchased a 6' cultipacker, it weighed in at approx 900 LBs. the 3400 had no problems with it. It raise high enough to transport to the food plots and pulling a cultipacker tkaes very little horse power. On the Kubota web site I beleive they have all the specifications for max lift at the ends of the lift arms. Check it out. The food Plots turned out great when using the cultipacker.

 

[btrow]

Thanks for the feedback. I have gone ahead and ordered the 5' cultipacker. The manufacturer advertises it as an implement that will work with the b3200 so I am goint to trust them on this one. I am really looking forward to using it on food plots. Seems to be a must if you want good ones.

Thanks again.