B7100 starts lumpy
- Thread starter stevemt
- Start date
- Views: 964
Rebel
Silver Member
Might have a little bit of air in your fuel system that will take a while to work itself out, could also be cold weather.
whistlepig
Elite Member
May have air bleeding in to the lines while its sitting. Look for fuel leaks on your lines. If it is leaking fuel air can get in through these leaks.
checked all of the fuel lines I'm staring to lean towards the glow plugs herad a story of the tip of a worn glow plug dropping off and going into the cylinder. don't know if that is an old wives tale or not. B7100 sits in a nice shed so the cold doesn't get into its bones
Egon
Epic Contributor
Have you tried adjusting the throttle setting for start up?
