Jun 7, 2007 / B7100HST 3PH Arms won't lower Thread Starter #11 OP T tuppy New member Joined May 28, 2007 Messages 6 I've moved the valve left and right (it was very tight and hard to move) until it got loose. Still no luck. Also loosened bolt on top of hydraulic pump until fluid flowed and then reinstalled. Nothing, again.
I've moved the valve left and right (it was very tight and hard to move) until it got loose. Still no luck. Also loosened bolt on top of hydraulic pump until fluid flowed and then reinstalled. Nothing, again.
Jun 7, 2007 / B7100HST 3PH Arms won't lower #12 crbr Veteran Member Joined Apr 20, 2007 Messages 1,705 Location East TN Tractor Kub - 2006 | B7800, 2022 | BX 1880 I think I'd call a Kubota dealer, ask for service, and ask away. Someone there may be able to readily offer up a fix.
I think I'd call a Kubota dealer, ask for service, and ask away. Someone there may be able to readily offer up a fix.
Jun 7, 2007 / B7100HST 3PH Arms won't lower Thread Starter #13 OP T tuppy New member Joined May 28, 2007 Messages 6 Looks like my best bet at this point! Thanks, all....
