btolle
Platinum Member
</font><font color="blue" class="small">(
Another 50 Hr service tip: check the torque of your lugnuts! I haven't had a problem - but I've read a number of posts where folks have found a loose nut or two....I did find a loose bolt on my FEL after @ 15 hrs use...)</font>
Also check the bolts that hold the hubs on the axles. On my B7510 I had to tighten them 4 or 5 times in the first 50 hours of use until they "set" themselves. I still check them regularly.
Bill Tolle
Another 50 Hr service tip: check the torque of your lugnuts! I haven't had a problem - but I've read a number of posts where folks have found a loose nut or two....I did find a loose bolt on my FEL after @ 15 hrs use...)</font>
Also check the bolts that hold the hubs on the axles. On my B7510 I had to tighten them 4 or 5 times in the first 50 hours of use until they "set" themselves. I still check them regularly.
Bill Tolle
