B7800 on its way!!!!!!

[mkflyfish]

/forums/images/graemlins/grin.gif I'm so excited, it should be home in about 1/2 and hour! /forums/images/graemlins/grin.gif

B7800 w/ FEL

more info later, I'm to excited to sit here and type!

/forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/wink.gif /forums/images/graemlins/smirk.gif
Michael

 

[Anonymous Poster]

Mines coming this week. Yee hahh /forums/images/graemlins/grin.gif

 

[Mark_in_NH]

Boy, the nerve of these new guys. To go out and play with his new tractor, BEFORE he even tells us about it. /forums/images/graemlins/shocked.gif
GEEEZZZZZ !!!!!!!! /forums/images/graemlins/grin.gif

Congratulations Michael and Andy on your new tractors. /forums/images/graemlins/grin.gif Fill us in on the details when you can.
Oh, and details means pictures to. /forums/images/graemlins/grin.gif

 

[Anonymous Poster]

I have pictures of mine I took with my digital. I made sure it was set at the smallest size frame and what do you know. Its still too large to send. What am I missing here. How do I decrease them in size?

 

[Mark_in_NH]

Andy,
All of the pictures I take are at 2400 x 1800. I reduce them down to an average of 640 x 480 +/- in order for them to adhere to TBN requirements.
Most all digital camera software has the ability to resize. It may be listed under the drop down EDIT menu or it might be a click on button at the top of your screen once you have a picture open.
If all else fails, go to the software's help menu and look for / search for Rsize or Resizing an image etc.
Good luck.

 

[Anonymous Poster]

Thanks for the suggestions and pm's. I have my prints downsized as much as possible. I checked their size and even the smallest one is about 225,000 bytes. I believe we cannot download anything over 100,000 bytes. Anyway I will continue to search for the website viewpro 16? Does anyone have an address where I can download this program.

Andyman

 

[Anonymous Poster]

It sounds like your compression settings on the imaging software are set to "0". Change it to 10:1 and you should be fine with a JPG image.

 

[Anonymous Poster]

Hi Andyman
I guess this is a little off topic but I like a site called Stroud's CWSApps, http://cws.internet.com. If you can't find something you like, you can use MS Paint which should already be on your computer. Go under Image, Stretch/Skew and put the same value under horizontal/vertical stretch. It doesn't work perfectly, but see if you like it. Good luck.

 

[Anonymous Poster]

Mine showed up this afternoon. I took a few pictures so here goes.

 

[Anonymous Poster]

another one