Briscoe9
New member
I haved lost the operating instructions for my DK 35 Back Hoe attachment- appears to be a Kioti backhoe- not Rhino- can I get one through a dealer/ service rep? help! /forums/images/graemlins/crazy.gif
back hoe manuel
- Thread starter Briscoe9
- Start date
- Views: 1770
wallace
Veteran Member, Approved Advertiser
No you will have either a KB2375 or KB2385 backhoe
More than likely you will have the KB2385 that is the most common one and It is a 8-1/2 foot digging depth.
Just email me you address and we can get you one out. /forums/images/graemlins/grin.gif
Rick
More than likely you will have the KB2385 that is the most common one and It is a 8-1/2 foot digging depth.
Just email me you address and we can get you one out. /forums/images/graemlins/grin.gif
Rick
</font><font color="blue" class="small">( Will get the number off the loader tomorrow, does the loader model have anything to do with the backhoe model? )</font>
No, that was just a brain fart on my part, poetry in motion.
I meant the backhoe model, sorry. Some folks buy the 2375 and others get the 2385 for the DK35. Just need to know which you have.
If you have particular questions to ask about it, maybe we could just tell yo the answers. Mine is no different in the operation. just shorter.
John
No, that was just a brain fart on my part, poetry in motion.
I meant the backhoe model, sorry. Some folks buy the 2375 and others get the 2385 for the DK35. Just need to know which you have.
If you have particular questions to ask about it, maybe we could just tell yo the answers. Mine is no different in the operation. just shorter.
John
CT_Jeff
Member
I probably should have started a new thread, but since this is a backhoe question thread here goes. I have a KB2365 with the PTO pump. There is a part that connects the pump and the PTO shaft. On this part there is a plunger pin to hold/release the part on the PTO shaft. It no longer wants to stay in. I am not sure how it is supposed to be held in. I was wondering if anyone knew what part(s) to get to fix this. I don't want to run the backhoe with this being able to just come loose. I have attached a picture to show what I mean, you can see that the plunger is most of the way out in this photo. Thanks in advance.
Jeff
Jeff
Attachments
Well, I've never actually seen that unit, but doesn't that just push in long enough for you to push it onto the PTO shaft, and then you let go and pull back on it, and it locks onto the shaft? Just like most PTO drive shafts? They often have twisting or pulling mechanisms, but the idea is the same as a button you push allowing you to slide it onto the shaft. That's what it looks like to me, and that it is as it should be.
Is it holding the drive shaft on? I've never used a PTO pump backhoe, so maybe it's not like a regular drive shaft would be.
John
Is it holding the drive shaft on? I've never used a PTO pump backhoe, so maybe it's not like a regular drive shaft would be.
John