SkyPup
Elite Member
- Joined
- Dec 3, 2003
- Messages
- 3,079
- Location
- North Central, Florida
- Tractor
- Kubota L-39 GST TLB, Kubota L3130GST, Massey 1030 HST, Kubota ZD-21 ProDecK, Two Euro VW TDIs
Yeah, I deliberated over the placement of the clevis hook for quite sometime and settled on this position since it is 100% noninterferring as well as a straight up and down position.
I cut the pin end of the clevis grab off with the plasma cutter and then sliced off the back side of the 3/8" clevis to level it off and then welded it directly onto that heavy duty crossover bar. I like it. /forums/images/graemlins/wink.gif
I cut the pin end of the clevis grab off with the plasma cutter and then sliced off the back side of the 3/8" clevis to level it off and then welded it directly onto that heavy duty crossover bar. I like it. /forums/images/graemlins/wink.gif